PRESS BRAKE PUNCHES PROMECAM (EURO) 30°
Hereby you can find our standard press brake punches of Promecam (EURO) tool system with 30° active angle. Punches of 30° could be used also together with hemming dies.
General punch PGP-020 3006
General punch PGP-020 3030
General punch PGP-020 3050
General punch PGP-021 3005
General punch PGP-021 3030
General punch PGP-022 3005
General punch PGP-023 3005
General punch PGP-024 3006
General punch PGP-025 3005
For any standard or special punches, modification and bending possibilities please contact us. We will be glad to provide any support.
Promecam or European system - is the most popular and economic clamping system for main manufacturers and models of press brakes with advantages of use for low and medium tonnage together with rich production line of tools for standard and special geometries. The main machines which are in use with Promecam tool system : Amada, all main Italian manufacturers (Gasparini, Salvagnini, Euromac, Colgar, Vimercati, Schiavi, GADE), all main Turkish manufacturers and in general in all asian press brakes. Machines with other tooling systems could be equipped with the adapters to use Promecam tools. We also are specialized to give the correct and equal analogues of our bending tools according to the production line and codes of any other manufacturer or original tooling codes.
General punch PGP-020 3006 
α
R
H
30°
0,6
104 mm
100 t/m
General punch PGP-020 3030
α
R
H
30°
3,0
104 mm
100 t/m
General punch PGP-020 3050
α
R
H
30°
5,0
104 mm
100 t/m
General punch PGP-021 3005
α
R
H
30°
0,5
80 mm
100 t/m
General punch PGP-021 3030
α
R
H
30°
3,0
80 mm
100 t/m
General punch PGP-022 3005
α
R
H
30°
0,5
105 mm
50 t/m
General punch PGP-023 3005
α
R
H
30°
0,5
135 mm
50 t/m
General punch PGP-024 3006 
α
R
H
30°
0,6
140 mm
40 t/m
General punch PGP-025 3005
α
R
H
30°
0,5
200 mm
50 t/m
For any standard or special punches, modification and bending possibilities please contact us. We will be glad to provide any support.
Promecam or European system - is the most popular and economic clamping system for main manufacturers and models of press brakes with advantages of use for low and medium tonnage together with rich production line of tools for standard and special geometries. The main machines which are in use with Promecam tool system : Amada, all main Italian manufacturers (Gasparini, Salvagnini, Euromac, Colgar, Vimercati, Schiavi, GADE), all main Turkish manufacturers and in general in all asian press brakes. Machines with other tooling systems could be equipped with the adapters to use Promecam tools. We also are specialized to give the correct and equal analogues of our bending tools according to the production line and codes of any other manufacturer or original tooling codes.
Download Precitools press brake tools Promecam catalog (8,6 Mb) (EN)
press-brake-tools.com
precitools.srls