EN | DE | FR | IT | ES | CZ | RU | DE-CH | FR-CH | IT-CH

Press brake tools Promecam (Euro)

Press brake tools Promecam (Euro)
We offer rich selection of standard press brake tools for Promecam (European) Style system. This system is usually installed on main European press brakes and 95% of press brakes with origin from Asia or Turkey. Promecam system is one of the most comfortable to use to follow low and medium tonnages with different variety of tooling for air bending.

Main manufacturers supported:

Press brake tools for machines: Accurl, ACL, Adira, AM Machinery, Amada, Astrida, Augusta, Axial, Baykal, Blecken, Boschert, Bystronic, Cematek, CMU, CoastOne, Colgar, Colly, Dener Makina, Deratech, Durma, Edward Pearson, Ermaksan, Euromac, Femas, Feysama, Fratelli Farina, GADE, Gasparini, Gecko, Gelber Bieger, Gilardi, Gizelis, Guifil, HACO (Atlantic), Harsle, Hammerle, Hesse, Hezinger, Hilalsan, IMAL, Inanlar, Ironmac, ITEK, Jean Perrot, JFMI, JMT USA, Jordi, Jouanel, KAAST, Karmet, Kingsland, Knuth, Kruman, LoirSafe, Mebusa, Mecos, MVD INAN, Nargesa, OMAG, Peliant, Probend, Rico, RMT, Salvagnini, Schiavi, Schroder, SMD, STR, Tabama, Teda, TCI Cutting, UZMA, Vartek, Vicla, Vimercati, Warcom, Yangli, YSD etc. Press brakes with other tooling systems could work with Promecam dies if support flat bottom tools and for punches - through clamping adapters.
Press brakes Trumpf of economic series or after modernizations could be also with Promecam tooling system.
Support of angeled (notched) tang Promecam for Amada original japanese and US clamps (One Touch)

Promecam press brake tools configuration

Promecam system holders
Promecam system has not one piece but several elements holder which as per drawing:
(1) - Beam of press brake (2) - Upper clamp (3) - Intermediate (4) - Lower clamp (5) Punch

Main details:

list High quality european materials C45 / C45 quenched / Cr42Mo4
list Working surfaces for bending with 55-60 HRC / 52-58 HRC
list Professional induction hardnening of wear places and areas
list High precision grinding
list Guaranteed replacement to previous supplied pieces
list Parallelism of surfaces
list Marking with all details of the tool
list With the use of upper and lower adapters could be used with other press brake systems

Promecam press brake tools production program:

list 90° punches (general, straight and gooseneck types) - used for stamping (available also under request)
list 88° punches (general, straight and gooseneck types, including big height up to 200 mm)
list 85° punches (general, straight, gooseneck types)
list 60° punches (general, straight, formed radius and gooseneck types, including big height radiused punch up to 200 mm)
list 45° punches (general, straight and formed radius types)
list 35° punches (straight, acute, formed radius types)
list 30° punches (straight, acute, formed radius types)
list 26° punches (straight, acute, formed radius types)
list Holders with radius inserts till R50
list 2V dies (Amada style) 90° / 88° / 60° / 30° including auto-centered dies
list 2V / 3U / 4V dies 85-88° / 85° / 60°
list Standard 1V dies 85° / 80° / 70° / 60° / 45° / 30° till V220
list T-shape 1V dies (H=80 and H=120) V6-V25 90° / 88° / 85° / 60° / 45° / 30°
list Die inserts 1V V4-V25 88° / 85° / 60° / 30°
list Die holders with polyurethane inserts
list Hemming flattening dies V6-V12 35° / 30° / 26° including pneumatic types
list Hemming flattening sets 24° / 28°
list Holders with inserts for Z-bends
list Punch holders
list Die holders and elongation adapters
list Adapters

Lengths available:

list 835 mm solid piece
list 415 mm solid piece
list 805 mm sectioned / segmented set (for punches: 100 mm horn left + 270 mm + 10 mm + 15 mm + 20 mm + 40 mm + 50 mm + 200 mm + 100 mm horn right)
Promecam (Euro) sectioned / segmented punch set
list 805 mm sectioned / segmented set (for dies: 200 mm + 10 mm + 15 mm + 20 mm + 40 mm + 50 mm + 370 mm + 100 mm)
Promecam (Euro) sectioned / segmented die set
list Special lengths calculated based on customer's request: calculated as price for solid piece + additional prices for cut.

Press brake tools modification

Standard possible modifications

We offer also modifications of standard press brake tools for the possibility to use for special solutions and bends if standard geometry leads for collission or other problem with bending process:
list Radius modification for punches and dies
list Special lengths
list Angle modification
list Clamping tang modification
list Additional milling and material removal to prevent special collissions
list Milling of windows
list Horns modifications
list Special coatings