EN | DE | IT | ES | FR | CZ | RU


Together with the press brake tooling we are able to supply additional units for sheet metal production shops and press brake daily operation such as manual tooling mor measurement (angles, radius etc.), press brake bending film, storage cabinets, various holders, supports and adapters for different systems of press brakes to change from one to another.
we believe that we can support the customer not only with press brake tooling but with any additional products that press brake operator could need. For conventional press brakes we are able also to offer the frontal support arms for sheet metal. Please contact with us with more information about your request.

Press brake antimark protective film


We offer antimark protective film for press brake bending.
Why would you need it:

point  If you are looking for protection from scratches, marks and prints and other possible surface defects during bending;
point  Your surface of the part is already prepared (grinded or finished);
point  For prepainted parts bending;
point  Parts after galvanic treatment, plated or other coating applied;
point  Additional die protection;
point  Reworking of parts (removing marks and other surface preparation is hard or impossible)

About our press brake bending film:

point  Premium quality, made in Germany or Italy;
point  Usable on any machine and any press brake tools;
point  High restistance against oil, grease, dirt, other contamination;
point  Long duration of use;
point  Applicable for any material such as steel, stainless steel, aluminium alloys etc.

The bending film and bending with film is highly recommended for bending activities to fabricate the products with decorative or polished / grinded / finished surface or with coating, production of kitchen and restaurant furniture, lifts, building and interior panels, reduction of costs for post-bending preparation of parts during fabrication process. The film could be used as it is with any tooling or press brake with manual positioning or usage of special holders to fix and to rotate after consume.

The delivery program:
point  0,4 x 100 mm width (length of roll 54 m)
point  0,5 x 100 mm width (length of roll 45 m)
point  0,5 x 105 mm width (length of roll 30 m)
point  0,6 x 100 mm width (length of roll 45 m)
point  0,8 x 90 mm width (length of roll 30 m)
point  0,8 x 100 mm width (length of roll 18 m)
point  Width 150-200 mm ; 1,0 and 2,0 mm thickness film is available under request.

Storage cabinet for press brake tools


We offer robust, professional and great looking tooling storage cabinets specially adapted for storage of press brake tools inside of the workshop. With our tooling cabinets you can perfectly organize your storage, save the space and make much easier the work of the operator for daily bending. We offer several types for various tooling systems.

Tooling cabinet for Promecam system (Type A)

point  1050 mm x B 850 mm x 1240 mm, 310 kg
point  4 drawers with 3 shelves in each
point  Drawers with rollers
point  Shelf height up to 210 mm (990 mm without additional shelves)
point  Material thickness 3 mm

Tooling cabinet for WILA / TRUMPF system (Type A)

point  1180 mm x 850 mm x 1240mm, 330 kg
point  4 drawers with 3 shelves in each
point  Drawers with rollers
point  Shelf height up to 210 mm (990 mm without additional shelves)
point  Material thickness 3 mm

Complete specifications under request.
Free delivery for DE, CH, IT (without additional costs)

If you would like to request tooling cabinet for other press brake tools system or with additional drawers - please contact us.